TECH / Hardware 4 min read

Cat 8 Ethernet Cable: Speed, Max Length, and Should You Buy It for Home?

Antonio NEMCD Author
Published Jul 20, 2020 · 4 min

Online marketplaces like AliExpress and Amazon are packed with patch cables proudly labeled Cat 8 and promising speeds up to 40 Gbps. That number sounds wild when many homes are still running on 100 Mbps or standard 1 Gbps gear.

Cat 8 Ethernet twisted pair cable

Yet Category 8 comes with strict limits on cable length, shielding, and grounding that make it far less practical for an average apartment than the marketing suggests. Let’s look at how Cat 8 actually works and when it makes sense to buy.

Speed, Bandwidth, and the 30-Meter Limit

Each new Ethernet category supports a wider signal frequency band, which demands better copper, tighter twists, and heavier shielding – and with Cat 8, it sharply reduces maximum channel distance.

Ethernet cable categories comparison Cat 6 Cat 7 Cat 8

Here is a quick side-by-side of the real-world standards:

  • Cat 5e (100 MHz): up to 1 Gbps (and 2.5GBASE-T on shorter runs) up to 100 meters.
  • Cat 6 (250 MHz): 1 Gbps up to 100 m, and 10 Gbps on runs up to 55 meters.
  • Cat 6A (500 MHz): full 10 Gbps across the entire 100-meter distance.
  • Cat 7 / 7A (600–1000 MHz): shielded 10 Gbps standard (100 m) defined by ISO with GG45/TERA connectors, never adopted by TIA.
  • Cat 8 (2000 MHz): 25 Gbps (25GBASE-T) and 40 Gbps (40GBASE-T), but limited to a 30-meter maximum channel length.

Under ANSI/TIA-568-C.2-1, those 30 meters break down strictly into up to 24 meters of permanent horizontal cable plus at most 6 meters combined for patch cords at both ends, with no more than two connectors in the link.

Inside a Cat 8 Cable and Cat 8.1 vs Cat 8.2

A real Cat 8 cable uses pure bare copper conductors (typically 22–26 AWG) and double shielding (S/FTP): each of the four twisted pairs is wrapped in its own foil shield, with an overall braided shield around all pairs. Without that structure, 2000 MHz signaling suffers severe crosstalk.

Internal S/FTP shielding structure of Cat 7 and Cat 8 Ethernet cable

ISO/IEC 11801 also splits Category 8 into two subtypes:

  • Cat 8.1 (Class I): uses standard shielded RJ-45 (8P8C) connectors and is fully backward compatible with Cat 6A, Cat 6, and Cat 5e equipment.
  • Cat 8.2 (Class II): designed for specialized GG45 or TERA connectors (compatible with Cat 7A) and rarely seen outside data centers.

Should You Buy Cat 8 for Home?

Cat 8 was engineered primarily for data centers – linking servers to Top-of-Rack switches at 25/40 Gbps over short runs without switching to fiber. For a home or office network running at 1–2.5 Gbps (or future-proofing for 10 Gbps), honest pure-copper Cat 6 or Cat 6A is much more flexible, thinner, and works cleanly up to 100 meters.

Watch out for cheap flat “Cat 8” cords: ultra-thin flat cables stamped “Cat 8 40Gbps” on marketplaces are often made from copper-clad aluminum (CCA) or 30–32 AWG wire. They may work fine for regular Gigabit internet, but they will never pass true 2000 MHz certification – and heavy shielding only does its job when connected to properly grounded ports.

If you just want a tidy, well-made 1–3 meter patch cord between a router, PC, or NAS, reputable round copper cables from brands like Vention or Ugreen are nicely built – just do not pay extra for the “Cat 8” label expecting it to magically speed up a home internet connection.

Related posts:

Leave a Comment