Failed to Load ldlinux.c32 on USB Boot – How to Fix
If you flashed an Ubuntu, Linux Mint, Debian, or other Linux ISO onto a USB drive and your PC stalls at boot with a black screen saying failed to load ldlinux.c32 (or Missing parameter in configuration file), the Syslinux bootloader on the flash drive was written incorrectly.

This error happens most frequently with tools like UltraISO or older builds of UNetbootin: they unpack the ISO onto a FAT32 partition and install their own Syslinux version, which clashes with the ldlinux.c32 binary bundled inside the Linux ISO.
Fix 1 (Most Reliable). Write the USB in DD Image Mode
To eliminate Syslinux version mismatches altogether, write the ISO raw (sector-by-sector) instead of extracting files. Three free tools handle this reliably:
- Rufus in DD Image mode: select your Linux ISO, click Start, and when Rufus asks whether to write in ISO or DD mode, pick “Write in DD Image mode”.
- Ventoy: install Ventoy onto the USB stick once, then simply drag and drop any
.isofiles onto it like a regular flash drive –ldlinux.c32errors disappear completely. - balenaEtcher or Win32 Disk Imager: both always write raw images directly to the drive (in Win32 Disk Imager, change the file picker filter from
*.imgto*.*so.isofiles show up).
Fix 2. If the Error Persists Even After DD Mode
Judging by dozens of reader reports on this post, hardware quirks and BIOS settings can trigger the exact same screen:
- UEFI vs Legacy BIOS (CSM) mismatch: a GPT/UEFI-only USB stick will not boot on an older Legacy BIOS board (and vice versa). In Rufus for older PCs, pick partition scheme MBR and target system BIOS or UEFI.
- Use a USB 2.0 port instead of USB 3.0: on older motherboards, booting Linux from a blue USB 3.0 port occasionally drops out right when reading
ldlinux.c32– move the drive to a black rear USB 2.0 port. - Verify the ISO checksum: a corrupted or half-finished ISO download throws the exact same error. Check the SHA-256 hash before flashing.
- Try a different USB stick: some older or bargain 32–64 GB flash controllers do not get along with legacy BIOS boot loaders.
diskpart → list disk → select disk X (double-check your USB disk number!) → clean → create partition primary → format fs=fat32 quick.In nine out of ten cases, ditching UltraISO and re-flashing the same ISO with Rufus in DD mode or Ventoy gets the installer booting cleanly on the very first try.