TECH / Servers & Websites 5 min read

Tailscale Instead of a Public IP: Remote Access to PC, NAS & RDP in 5 Minutes

Antonio NEMCD Author
Published Nov 20, 2026 · 5 min

Connecting to your home PC over RDP while traveling, pulling files off a home NAS, or SSHing into a mini-server used to mean paying your ISP for a static public IP and opening ports on your router – or running your own VPN server. Today, most 4G/5G carriers, Starlink, and many home ISPs place customers behind CGNAT, where port forwarding does not even work.

Compact home mini-PC, NAS server, and laptop connected via Tailscale mesh VPN

The fastest, safest way to solve this without renting a VPS or exposing a single router port is Tailscale. It takes five minutes to set up, runs on top of fast WireGuard encryption, and is free for personal use.

How Tailscale Works (and Why It Beats Port Forwarding)

Exposing port 3389 (RDP) or 22 (SSH) directly to the public internet invites automated brute-force scanners within minutes. Tailscale flips that model around:

  • Zero open ports on your router. Clients automatically negotiate direct encrypted WireGuard tunnels right through NAT and CGNAT (and fall back to encrypted DERP relays if a strict corporate firewall blocks direct UDP).
  • A stable private IP for every machine. All your laptops, phones, desktops, and NAS boxes join one private mesh network with fixed 100.x.y.z addresses and easy MagicDNS hostnames like home-pc.
  • Generous free personal tier. Tailscale’s Personal plan is free for non-commercial use and includes up to 6 users and unlimited personal devices (plus up to 50 tagged nodes such as subnet routers and exit nodes).

5-Minute Setup (Windows, Linux, Phone)

1. Install on Your Home PC (Windows 10 / 11)

Grab the installer from tailscale.com or install it in one line via winget:

winget install --id Tailscale.Tailscale

Launch Tailscale from the system tray and sign in with Google, Microsoft, or GitHub. Your PC immediately receives its private 100.x.y.z address.

2. Install on Linux, Raspberry Pi, or a VPS

On Ubuntu, Debian, Proxmox, or Raspberry Pi, installation takes two commands:

curl -fsSL https://tailscale.com/install.sh | sh
sudo tailscale up

Open the short login link printed in the terminal to authorize the machine in your account.

3. Connect to Your Home PC via RDP

Install Tailscale on your travel laptop or phone, log into the same account, and enter your home PC’s 100.x.y.z address in Windows Remote Desktop Connection (mstsc.exe). If Windows refuses to save your RDP password on the client PC, see my quick fix here: “Your system administrator does not allow saved credentials” in RDP.

Two Killer Features for a Home Network

Reach Your Entire Home LAN (Subnet Router)

You cannot install Tailscale on a router, IP camera, or older network printer. Instead, turn one always-on Linux box at home (like a Raspberry Pi or mini-PC) into a subnet router. First enable IP forwarding in the Linux kernel – without it, subnet routing and exit nodes will not forward traffic:

echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.d/99-tailscale.conf
echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.d/99-tailscale.conf
sudo sysctl -p /etc/sysctl.d/99-tailscale.conf

Then advertise your home subnet:

sudo tailscale up --advertise-routes=192.168.1.0/24

Open login.tailscale.com/admin/machines and approve the route. From anywhere in the world, you can now reach local 192.168.1.x devices as if you were sitting on your home Wi-Fi.

Your Own Travel VPN (Exit Node)

Enable exit node mode on a home Linux box or cheap cloud VPS:

sudo tailscale up --advertise-exit-node

Approve it in the admin console, and your phone on hotel or cafe Wi-Fi can route all internet traffic securely through your home connection or server – no third-party VPN subscription needed.

Tailscale vs. Self-Hosted WireGuard on a VPS

Use Case Best Choice
Private access to RDP, SSH, NAS, Home Assistant, cameras Tailscale (free, 5-minute setup, works behind CGNAT)
Public website, game server, or port open to visitors without a client VPS + WireGuard (gives you a real public IPv4)
Zero reliance on any third-party coordination server Self-hosted WireGuard (or self-hosted Headscale on a VPS)

If you specifically need a public IPv4 address to expose services over Starlink or 4G, I walked through the full VPS setup in Public IP Without Your ISP: VPS + WireGuard (and covered budget European servers in my Hetzner review). For private everyday access to your own machines, though, Tailscale saves hours and gets security right out of the box.

Related posts:

Leave a Comment