ACPI\HPQ0004 Driver (HP 3D DriveGuard) for HP Laptops – Download
After a clean Windows install on HP laptops (ProBook 4320s, 4510s, 4530s, 4730s, Pavilion g6, and similar models), Device Manager almost always flags one unknown device: ACPI\HPQ0004 (shown as ACPI\HPQ0004\3&11583659&0, ACPI\HPQ0004\3&B1BFB68&0, ACPI\HPQ0004\3&2411E6FE&0, or *HPQ0004).

That ID belongs to HP’s built-in drop sensor, HP 3D DriveGuard (HP Mobile Data Protection Sensor). Below is the verified Windows XP installer, instructions for Windows 7/10/11, and why SSD owners can safely skip it.
What Is ACPI\HPQ0004 – and Do You Need It With an SSD?
HP 3D DriveGuard is a motherboard accelerometer that detects sudden drops or shocks and immediately parks the mechanical read/write heads of a spinning hard drive (HDD) to prevent platter damage.
ACPI\HPQ0004 in Device Manager and disable it, or install the driver solely to clear the yellow warning icon.
Download HP 3D DriveGuard Driver (Windows XP)
Official Windows XP release (version 1.10.7.1, HP SoftPaq SP45135, 3.9 MB, digitally signed by Hewlett-Packard):
Download: sp45135.exe
I originally installed this on an HP ProBook 4320s (WS910EA). Readers in the comments also confirmed it worked on Windows XP for the ProBook 4510s and 4530s when HP’s newer downloads failed.
Windows 7, Windows 10, and Windows 11
sp45135.exe is strictly for Windows XP – do not install it on Windows 7, 10, or 11! Readers reported that installing a mismatched 3D DriveGuard build on Windows 7 can cause boot failures (BSOD at startup).
The safe way to clear ACPI\HPQ0004 on Windows 7, 10, and 11:
- Create a Windows System Restore point first before installing any HP 3D DriveGuard package.
- On Windows 10 and 11, check Settings → Windows Update → Advanced options → Optional updates → Driver updates – Windows frequently delivers HP Mobile Data Protection Sensor automatically there.
- On Windows 7, download the HP 3D DriveGuard package from
support.hp.commatched strictly to your exact laptop model. - If Windows 7 fails to boot after installing a mismatched driver, press
F8at startup and choose Last Known Good Configuration or roll back via System Restore.
Quick Note on Other HP ProBook 4320s (WS910EA) Drivers
On the same ProBook 4320s under Windows XP, the remaining tricky hardware turned out to be a Ralink 802.11 b/g/n Wi-Fi card (SoftPaq sp51059.exe) and Ralink Motorola Bluetooth (SoftPaq sp51076.exe). Checking exact VEN/DEV Hardware IDs in Device Manager or AIDA64 is always the fastest way to match the right package.